NIStune-software and calibration editor for setting up Nissan ECU.
.
NIStune supports most Nissan car models.
The hardware part of the NIStune is a small Board (daughter boards), which is installed in the factory control unit instead of a regular chip or processor with firmware, and provides the ability to use this software to change the fuel and ignition cards, constants (for example, cutoff, correction of the lambda probe, speed limiter, etc.) "on the fly", directly during engine operation. Changes take effect immediately, they can be immediately felt or seen by changing the readings of standard sensors or through this SOFTWARE. Includes built-in data logger and Mod-and for many of the supported UNIT. Nistune is the perfect tool for tuning Nissan and infinity sports cars in real time.
What the program can do:
Monitoring of the sensors and trace the ECU
Logging of engine operation parameters
Ability to visually view and analyze logging results in the form of graphs
Saving firmware in binary format
Support for up to 2 external wideband oxygen sensors (WDC supported innovation and AEM)
Real-time control unit firmware"
View engine parameters and error codes via consult Protocol
Deleting recorded error codes using the consult Protocol
The transition to more efficient injectors / MAF
Types of Nistune boards for Nissan ECU (there are 4 types of boards):
M30 Infiniti (VG30DE)
Site 300ZX models Fairlady device Z32 (VG30DETT)
[For the skyline ECR33 RB25DET you can use the Z32 vg30dett control unit with small changes in the motor wiring]
Skyline HCR32 (RB20DET)
Skyline BNR32 (RB26DETT)
[For BNCR33, BNR34 scenery can use BNR32 RB26DETT control unit and O2 sensors]
U12 Bluebird (KA24E)
The Q45 chip (VH45DE) Works with NIStune but requires an external emulator because the firmware is too large for Board type 2
Generator-FSC and NBT codes for BMW navigation system CCC (BMW CIC GC code generator).
Designed to generate FSC codes for installing and updating maps for the BMW Professional CIC navigation system. Supports calculation of FSC codes for maps of America, Asia, Eastern and Western Europe from 2013 to 2020 for all BMW vehicles with CIC navigation .
With this SOFTWARE you will be able to generate an FDOK/VeDoc code to access special DOS parameters for Mercedes truck programming. With this utility you will be able to disable the AdBlue system of Mercedes-Benz trucks.
Supported codes for calculation:
• XT (changing of NOx torque)
* XN (erase and disable relevant environmental codes and SCR systems )
is used in universal diagnostic complexes Bosch FSA 720, 740, 750, 760, 050. the FSA intended to diagnose engines and electronic systems, and also includes updated details on the connection and verification algorithms , the base reference measured values .. The program allows you to check the sensors and connections, batteries for measuring the leakage current, the passage of the CAN bus signal. Program Bosch FSA 7xx can be integrated with software ESI [tronic], but to integrate the need to match the version of programs.
When the diagnosis you choose your car model and get the set parameters specific to them. The program has a help system, which you will find general information on connecting mototestera description on the implementation of each of the test instructions. Using the reference section, you can see on the videos available that show all the possibilities of using mototesterov Bosch FSA. The new version of the program Bosch CompactSoft [plus] FSA 7xx FSA 050 2015/1 expanded list of cars.
Hello, friends! I would like to give opportunity for some guys to get FREE their files calculated with really powerful
ESS software. Post one file per person (DPF, EGR, Flaps, Throttle, DTC and so on) Honda, Mazda, Ford, Mitsubishi, Opel, Chevrolet, Saab. Renault, Nissan, VAG or Volvo. Thanks + rep before I gone reply with mod file.
