08-17-2017, 10:52 AM
MultiEcuScan v3.7 + Crack
Multiecuscan is a vehicle diagnostic software with advanced functions. It allows you to perform various diagnostics tasks on the supported vehicles/modules. In order to use the software you need an interface.
The following interfaces are currently supported by the software: KL (also known as VagCom 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, CANtieCAR.
Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
CANtieCAR is a professional multi-protocol interface with multiplexing capabilities.
Multiecuscan is a vehicle diagnostic software with advanced functions. It allows you to perform various diagnostics tasks on the supported vehicles/modules. In order to use the software you need an interface.
The following interfaces are currently supported by the software: KL (also known as VagCom 409), ELM327 (1.3 or newer), OBDKey 1.40, OBDLink, ELM Scan 5, CANtieCAR.
Bluetooth OBDKey, ELM 327 and OBDLink interfaces are fully supported but not recommended for special functions (like PROXI Alignment, remote control programming, IMA coding, etc.)!
CANtieCAR is a professional multi-protocol interface with multiplexing capabilities.
DDDL 8.15 level 10
Xentry Advanced KeyGen 1.1 long
TEBS-E V6.01
ECUTools v1.59
Cat et2021A +FPKG
JCB Agco SISU Power WinEEM4 – JCB Service Tool 2.8.0
Xentry Advanced KeyGen 1.1 long
TEBS-E V6.01
ECUTools v1.59
Cat et2021A +FPKG
JCB Agco SISU Power WinEEM4 – JCB Service Tool 2.8.0