https://auto-mechanic.net/ Sat, 23 May 2026 20:29:40 +0000 MyBB https://auto-mechanic.net/showthread.php?tid=313 Sun, 15 Apr 2018 00:21:37 -0400 https://auto-mechanic.net/showthread.php?tid=313 Carista OBD2 3.6.4 full

Description: Carista OBD2 See ALL blocks, errors on them, reset errors. Can set something, encode.
The program significantly increased the number of readable blocks by the engine ECU the program allows you to read and erase the errors of the ABS.AIR BAG blocks and NOT ONLY.


Requires Android: 4.0 and up

Carista OBD2 3.6.4 full.rar
File Type
Hits	11
Size	124 bytes

]]> Carista OBD2 3.6.4 full

Description: Carista OBD2 See ALL blocks, errors on them, reset errors. Can set something, encode.
The program significantly increased the number of readable blocks by the engine ECU the program allows you to read and erase the errors of the ABS.AIR BAG blocks and NOT ONLY.


Requires Android: 4.0 and up

Carista OBD2 3.6.4 full.rar
File Type
Hits	11
Size	124 bytes

]]> https://auto-mechanic.net/showthread.php?tid=259 Mon, 12 Mar 2018 03:48:37 -0400 https://auto-mechanic.net/showthread.php?tid=259 Hacking LAUNCH EasyDiag / M-Diag / Golo / Diagun / Pro


Here:

How to enable Bluetooth packet capture on Android

Prototype Bluetooth packet LAUNCH

How to check version boot loader, firmware, diag. software, production date
LAUNCH EasyDiag / M-Diag / Golo EasyDiag / Diagun III / X431 Pro / X431 Pro3 / X431 Pro3S / DBSCar without official software

Secrets Commands LAUNCH

LAUNCH EasyDiag Hacking .rar
File Type
Hits	33
Size	165 bytes

]]> Hacking LAUNCH EasyDiag / M-Diag / Golo / Diagun / Pro


Here:

How to enable Bluetooth packet capture on Android

Prototype Bluetooth packet LAUNCH

How to check version boot loader, firmware, diag. software, production date
LAUNCH EasyDiag / M-Diag / Golo EasyDiag / Diagun III / X431 Pro / X431 Pro3 / X431 Pro3S / DBSCar without official software

Secrets Commands LAUNCH

LAUNCH EasyDiag Hacking .rar
File Type
Hits	33
Size	165 bytes

]]> https://auto-mechanic.net/showthread.php?tid=171 Tue, 13 Feb 2018 02:16:14 -0500 https://auto-mechanic.net/showthread.php?tid=171 Activation for all cars brands - EasyDiag scanner (11.2017, 12.2017, 01.2018)

Rep + Thanks = Link

EasyDiag scanner instruction .txt
File Type
Hits	33
Size	2.86 KB

]]> Activation for all cars brands - EasyDiag scanner (11.2017, 12.2017, 01.2018)

Rep + Thanks = Link

EasyDiag scanner instruction .txt
File Type
Hits	33
Size	2.86 KB

]]> https://auto-mechanic.net/showthread.php?tid=114 Mon, 29 Jan 2018 02:43:08 -0500 https://auto-mechanic.net/showthread.php?tid=114 LAUNCH EasyDiag Unlocking Locked Adapters

good news for owners of Locked adapters LAUNCH EasyDiag dug 

around on the Internet, collected information and ... it turned out! 

I will describe the recovery steps for both Locked and Blown 

LAUNCH EasyDiag adapters . 

We need a 

dump of a non-blocked adapter (with 52 firmware on board). The programer 
itself 

runs the programmer in the J- 

and the program in which I did everything



Programs recommended by Adminom 
program for firmware adapter 



native application ST-Link


Before we begin, we will 

use the utility from Segger to turn our St-Link V2 (clone) into the J-Link programmer
and install the program (downloaded from the above) with which we will flash our Device * We disassemble the adapter (I took it apart on the board with a knife by cutting the place of the gluing of the case) 



connect the programmer to the pictures


J-Link (ST-Link V2 Clone)



launch the J-Flash application 
Create a new project select the controller STM32F207 IG 





after all the procedures connect our adapter to the computer and connect it to the program in the Target tab, select Connect 
and well on the video)) 
Good luck, the guys write, I will definitely prompt))

Programs recommended by Admin 
program for firmware adapter 
native application ST-Link

Dumps 

- firmware 11.53, boot 1.23.001 program_memory_11.53.7z (172 KB)


and up to a heap flash from non-flicked MDiag: 
- firmware 11.55, boot 1.03.000 program_memory_11.55.7z (158 KB)
- firmware 11.49, boot 1.03.000 program_memory_11.49.7z (153 KB)
- firmware 11.12, but 1.03.000 program_memory_11.12.7z (143 KB)

OTP partition from the MDiag: 
otp_memory.7z (756 Bytes)

all download in

LAUNCH EasyDiag Unlocking .zip
File Type
Hits	21
Size	331.15 KB

]]> LAUNCH EasyDiag Unlocking Locked Adapters

good news for owners of Locked adapters LAUNCH EasyDiag dug 

around on the Internet, collected information and ... it turned out! 

I will describe the recovery steps for both Locked and Blown 

LAUNCH EasyDiag adapters . 

We need a 

dump of a non-blocked adapter (with 52 firmware on board). The programer 
itself 

runs the programmer in the J- 

and the program in which I did everything



Programs recommended by Adminom 
program for firmware adapter 



native application ST-Link


Before we begin, we will 

use the utility from Segger to turn our St-Link V2 (clone) into the J-Link programmer
and install the program (downloaded from the above) with which we will flash our Device * We disassemble the adapter (I took it apart on the board with a knife by cutting the place of the gluing of the case) 



connect the programmer to the pictures


J-Link (ST-Link V2 Clone)



launch the J-Flash application 
Create a new project select the controller STM32F207 IG 





after all the procedures connect our adapter to the computer and connect it to the program in the Target tab, select Connect 
and well on the video)) 
Good luck, the guys write, I will definitely prompt))

Programs recommended by Admin 
program for firmware adapter 
native application ST-Link

Dumps 

- firmware 11.53, boot 1.23.001 program_memory_11.53.7z (172 KB)


and up to a heap flash from non-flicked MDiag: 
- firmware 11.55, boot 1.03.000 program_memory_11.55.7z (158 KB)
- firmware 11.49, boot 1.03.000 program_memory_11.49.7z (153 KB)
- firmware 11.12, but 1.03.000 program_memory_11.12.7z (143 KB)

OTP partition from the MDiag: 
otp_memory.7z (756 Bytes)

all download in

LAUNCH EasyDiag Unlocking .zip
File Type
Hits	21
Size	331.15 KB

]]>